Original Part
Alternative Part
Shunt Voltage Reference IC Adjustable 2.5V 36 VV ±0.5% 100 mA SOT-23-3
Shunt Voltage Reference IC Adjustable 2.5V 36 VV ±1% 100 mA SOT-23-3
1. AS431IANTR-G1 Substitution Conclusion
The AS431IANTR-G1 is a qualified substitute for the NCP431BCSNT1G. Both devices share identical core parameters: they are adjustable shunt references with a nominal 2.5V reference, a maximum cathode voltage of 36V, a cathode current capability of 100mA, and an initial accuracy of ±0.5%. The key difference lies in the minimum operating current (minimum cathode current): the original part specifies 40µA, while the substitute requires 50µA. The substitute therefore needs slightly higher bias current to enter normal operation. This may lead to increased power consumption or potential startup failure in circuits demanding ultra-low power, such as deep-sleep or standby modes. However, for the vast majority of common applications (e.g., feedback loops in switching power supplies), this difference is generally acceptable. Furthermore, the substitute does not explicitly specify a temperature coefficient, whereas the original provides a typical value. For applications with precise drift requirements, verification against Diodes' detailed datasheet is necessary.
2. AS431IBNTR-G1 Substitution Conclusion
The AS431IBNTR-G1 can serve as a downgraded substitute for the NCP431BCSNT1G, suitable for applications with relaxed initial accuracy requirements. The two parts are fully compatible in terms of basic functionality, voltage range, cathode current capability, and package. The primary difference is initial accuracy: the substitute is rated at ±1%, compared to ±0.5% for the original. In-circuit, this doubles the potential deviation range of the actual reference voltage, which may affect overall system absolute accuracy or calibration thresholds. Like the AS431IANTR-G1, its minimum operating current is also 50µA, and its temperature coefficient is not explicitly specified. This part is suitable for cost-sensitive applications with wider system accuracy margins (e.g., voltage regulation feedback in certain switch-mode power supplies) and is not recommended for high-precision measurement or calibration circuits.
Analysis ID: D8F2-9316000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com