Original Part
Alternative Part
1. TL432AQDBZR Substitution Conclusion
The TL432AQDBZR can generally serve as a replacement for the original part, but attention must be paid to the impact of its reduced accuracy and differing quiescent current. Its output voltage range (2.495V-36V) and package are compatible with the original. The primary differences are: ① Accuracy is ±1% (compared to ±0.5% for the original), meaning the reference voltage absolute error is doubled. This may make it unsuitable for high-precision sensing circuits. ② The cathode current (Icat) is rated at 100mA (same as original), but its minimum operating current (Imin) is 80µA (original: 40µA). This indicates a higher minimum bias current is required to maintain regulated reference voltage, necessitating re-verification of bias conditions in low-power or high-impedance circuits. Substitution is acceptable if stringent accuracy and ultra-low-power requirements are not critical.
2. KA431SAMFTF Substitution Conclusion
The KA431SAMFTF can be substituted under specific conditions, but differences exist in accuracy, quiescent current, and package details. Its output voltage range matches the original. Key variances include: ① Accuracy is ±1% (same as TL432), similarly limiting its use in precision applications. ② Cathode current capability is 1mA (original: 100mA), indicating a significantly reduced output drive/sink capability, making it suitable only for very light load scenarios. ③ The package is SOT-23-3 with flat leads. While footprint-compatible with standard SOT-23-3, soldering process adjustments may be required. An advantage is its temperature coefficient (50ppm/°C), which matches the original, offering good temperature stability. Substitution can be considered if circuit requirements for drive capability and accuracy are relaxed, and package soldering is handled appropriately.
Analysis ID: 3DEE-BFD5000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com