Original Part
General Purpose Digital Isolator 3750Vrms 1 Channel 15Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
Alternative Part
General Purpose Digital Isolator 2500Vrms 1 Channel 100Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
General Purpose Digital Isolator 3000Vrms 1 Channel 25Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
1. ISO721DRG4 Substitution Conclusion
Direct substitution is not feasible. Although both are single-channel general-purpose digital isolators with compatible packages, there are significant differences in key electrical specifications. The isolation voltage rating of the ISO721DRG4 (2500Vrms) is notably lower than that of the original part (3750Vms), indicating insufficient reliability for high-voltage safety isolation applications. Its common-mode transient immunity (25kV/µs) is also inferior to the original (35kV/µs), making it more susceptible to malfunction in high-noise environments. While it offers advantages in data rate (100Mbps) and timing performance (e.g., propagation delay, pulse width distortion), and its operating voltage range (3V to 5.5V) does not fully overlap with the original (2.5V to 5.5V), these benefits do not compensate for the increased system risk resulting from the degraded isolation voltage and noise immunity.
2. ISO7310CQDRQ1 Substitution Conclusion
Substitution is conditionally feasible. This device matches the original in channel configuration, technology, and package. The differences are as follows: its isolation voltage rating (3000Vrms) is 20% lower than the original (3750Vrms), requiring a re-evaluation to confirm whether this margin meets the system's safety requirements. Its common-mode transient immunity (25kV/µs) is also lower than the original (35kV/µs), necessitating careful assessment of system robustness in high-noise environments. Its advantages include AEC-Q100 automotive qualification, which may offer benefits in reliability, temperature range, and supply chain stability, along with a higher data rate (25Mbps). The feasibility of substitution ultimately depends on the system's specific requirements for minimum isolation voltage and noise immunity. If the specification downgrades are acceptable, it can serve as a high-reliability alternative.
Analysis ID: FCD3-CD4C000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com