Original Part
Alternative Part
1. LM258DRG3 Substitution Conclusion
The LM258DRG3 is a viable substitute for the original BA10358FJ-GE2, as it is compatible with and outperforms the original part in most key parameters. However, a minor difference in input offset voltage should be noted. The specific differences are as follows: the input offset voltage is 3 mV (original: 2 mV), which may introduce slightly larger errors in applications requiring high-precision DC amplification. The slew rate is improved to 0.3 V/µs (original: 0.2 V/µs), indicating a faster response to large-signal transients. The gain-bandwidth product is increased to 700 kHz (original: 500 kHz), supporting higher-frequency signal processing. The input bias current is reduced to 20 nA (original: 45 nA), helping to minimize input-stage errors. The output current capability is enhanced to 40 mA (original: 20 mA), improving load-driving capacity. The package and supply voltage range (3V to 32V) remain identical to the original. Therefore, the overall substitutability is excellent, particularly for applications where improved speed and drive capability are desired. If DC precision is critical, the impact of the offset voltage difference should be evaluated.
2. LM2904WHYDT Substitution Conclusion
The LM2904WHYDT can serve as a substitute for the BA10358FJ-GE2, offering superior performance and an AEC-Q100 automotive-grade qualification. However, differences in supply voltage range and power consumption require attention. The key differences include: a maximum supply voltage of 30V (original: 32V), making direct substitution unsuitable if the application circuit voltage exceeds 30V; a quiescent current of 700 µA (original: 500 µA), indicating a modest increase in static power consumption. The slew rate is significantly improved to 0.6 V/µs (original: 0.2 V/µs), supporting faster large-signal response. The gain-bandwidth product is substantially higher at 1.1 MHz (original: 500 kHz), making it suitable for wider bandwidth amplification requirements. The input bias current is reduced to 20 nA (original: 45 nA), improving input accuracy. The output current capability is increased to 40 mA (original: 20 mA), enhancing drive strength. Furthermore, its AEC-Q100 automotive-grade certification ensures higher reliability in harsh environments, such as automotive electronics. The package is also an 8-SOIC. Substitution is feasible, particularly for applications demanding higher performance, enhanced reliability, and where the supply voltage does not exceed 30V.
Analysis ID: F455-EE05000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com