Original Part
Alternative Part
1. LM2902VDTBR2G Substitution Conclusion
The LM2902VDTBR2G can generally serve as a substitute for the AS324GTR-G1, with two key differences to note: its input bias current (90 nA) is notably higher than that of the original part (20 nA), which may introduce greater error in high-impedance signal or precision DC amplification applications. Additionally, its maximum supply voltage (32 V) is slightly lower than the original’s 36 V, posing a potential risk if the system operates near the upper voltage limit. Other core parameters—including minimum supply voltage (3 V), output current (40 mA), and package—remain compatible. Therefore, the LM2902VDTBR2G can be directly substituted in general op‑amp circuits where precision is not critical and sufficient voltage margin exists.
2. LM324PW Substitution Conclusion
The LM324PW can replace the AS324GTR-G1 in most scenarios, though three notable differences should be considered: its output current (30 mA) is lower than the original’s 40 mA, resulting in slightly weaker heavy‑load drive capability; its input offset voltage (3 mV) is marginally higher than the original’s 2 mV, which may affect DC accuracy; and its quiescent current (1.4 mA per channel) is higher, making it less suitable for power‑sensitive applications. On the positive side, the LM324PW offers better dynamic response thanks to its higher bandwidth (1.2 MHz) and slew rate (0.5 V/µs). If the application has relaxed requirements for output current and power consumption, benefits from wider bandwidth, and can tolerate slightly reduced precision, then substitution is acceptable.
Analysis ID: EA31-C6B9000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com