Original Part
Alternative Part
1. TSV6292AIST Substitution Conclusion
The TSV6292AIST can serve as a replacement for the AZV358GTR-E1, but several key differences must be noted. It is fabricated using CMOS technology, offering an extremely low input bias current (1 pA) and superior input offset voltage (800 µV), making it suitable for high-impedance sensing applications. However, its slew rate (0.5 V/µs) is only half that of the original part, which may result in insufficient large-signal response speed. Additionally, the lower supply voltage limit extends down to 1.5 V, enabling use in lower-voltage systems. The device comes in an 8-MiniSO package (3.00 mm wide), which is narrower than the original 8-TSSOP (4.40 mm wide); therefore, PCB compatibility should be verified. Its quiescent current (29 µA) is significantly lower, benefiting battery-powered applications, while the output current (74 mA) is slightly higher, providing somewhat stronger drive capability.
2. LMV358Q1MMX/NOPB Substitution Conclusion
The LMV358Q1MMX/NOPB can directly replace the AZV358GTR-E1, as its key parameters are highly consistent: gain bandwidth product (1 MHz), slew rate (1 V/µs), input bias current (15 nA), and supply voltage range (2.7 V to 5.5 V) all match the original. The main differences are its significantly higher output current (160 mA), which enables driving heavier loads, and its AEC-Q100 automotive qualification, making it suitable for harsh environments such as automotive electronics. The package is an 8-VSSOP (3.00 mm wide); although the pinout is compatible, its slightly smaller footprint compared to the original 8-TSSOP requires verification of the installation space. All other characteristics are nearly equivalent to the original part, and no circuit modifications are necessary for substitution.
Analysis ID: 84D6-2FF7000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com