Original Part
Alternative Part
1. LM358DRG3 Substitution Conclusion
The LM358DRG3 can directly replace the original part in most general-purpose applications, as their key parameters are highly aligned: slew rate (0.3V/µs), gain bandwidth product (700kHz), input bias current (20nA), and output current (40mA) are identical, and the packages are compatible. The main differences are a slightly higher input offset voltage (3mV vs. 2mV), which may marginally affect DC accuracy, and a lower supply current (500µA vs. 700µA), which helps reduce power consumption. However, its maximum operating voltage is somewhat lower (30V vs. 36V), so it is essential to verify that the actual application voltage does not exceed 30V. If high precision or supply voltages above 30V are not required, the LM358DRG3 is a reliable substitute.
2. BA10358FJ-GE2 Substitution Conclusion
Substituting with the BA10358FJ-GE2 requires caution, as several parameters differ significantly from the original part. Its slew rate (0.2V/µs) and gain bandwidth product (500kHz) are lower, limiting high-frequency signal processing capability. The higher input bias current (45nA vs. 20nA) may introduce additional error in high-impedance applications, and the output current is halved (20mA vs. 40mA), reducing load drive capability. Although the input offset voltage (2mV) matches the original part and the supply current (500µA) is lower, the overall performance degradation is notable. This substitute is only suitable for low-frequency, light-load applications with no stringent bandwidth or drive requirements, and direct replacement is not recommended.
Analysis ID: 9F69-3B31000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com