Original Part
SRAM - Asynchronous Memory IC 4Mbit Parallel 8 ns 48-TFBGA (6x8)
Alternative Part
SRAM - Asynchronous Memory IC 4Mbit Parallel 55 ns 48-TFBGA (6x8)
SRAM - Asynchronous Memory IC 4Mbit Parallel 10 ns 48-TFBGA (6x8)
1. IS62WV25616BLL-55BLI-TR Substitution Conclusion
Direct substitution is not recommended. There is a significant discrepancy in core speed performance between this part and the original. With an access time of 55ns, it is substantially slower than the original's 8ns. Under the same system timing requirements, it cannot meet the demands for high-speed read/write operations. A direct swap would lead to severe system performance degradation or timing violations causing functional failure. Although its operating voltage range (2.5V-3.6V) is wider and fully encompasses the original's 3V-3.6V requirement, this advantage is insufficient to offset the fundamental flaw in its speed grade. Therefore, substitution should only be considered for low-speed applications where timing is extremely non-critical.
2. IS61WV25616BLL-10BLI-TR Substitution Conclusion
Substitution is generally feasible after verifying system timing and supply voltage. The primary differences between this component and the original are its slightly slower access time (10ns vs. 8ns) and a lower minimum operating voltage (2.4V vs. 3V). The 10ns speed results in a marginally lower maximum operating frequency, but it is typically compatible with most systems that have adequate timing margin in their design. Regarding voltage, its 2.4V-3.6V range fully covers and is wider than the original's 3V-3.6V range. It will operate correctly under the original system's 3V supply. Note that if the system power supply is designed near the 3V threshold, the wider voltage range can actually be an advantage. The package, density, and interface are identical. Consequently, after conducting the necessary system-level timing and voltage verification, this part is a viable alternative.
Analysis ID: A696-E877000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com