Original Part
SRAM - Asynchronous Memory IC 4Mbit Parallel 8 ns 48-TFBGA (6x8)
Alternative Part
SRAM - Asynchronous Memory IC 4Mbit Parallel 12 ns 48-CABGA (9x9)
SRAM - Asynchronous Memory IC 4Mbit Parallel 15 ns 48-CABGA (9x9)
1. Substitution Conclusion for 71V416L12BEGI8
Caution is advised when substituting the 71V416L12BEGI8 for the IS61WV25616EDBLL-8BLI-TR. While technically feasible in part, there are critical differences to consider. The access time and write cycle time have increased from the original 8 ns to 12 ns. If the original system design relies on the 8 ns high-speed timing, using this substitute may lead to performance degradation or timing violations, particularly in high-speed processor or real-time applications. Furthermore, the package has changed from a 48-TFBGA (6x8 mm) to a 48-CABGA (9x9 mm). The difference in physical dimensions and pin layout may result in incompatibility. Direct substitution could necessitate PCB redesign or the use of an adapter, thereby increasing hardware integration complexity. This alternative may be considered for applications with less stringent speed requirements and where package adjustments are possible. Otherwise, it is not recommended.
2. Substitution Conclusion for 71V416L15BEGI8
The feasibility of substituting the 71V416L15BEGI8 for the original part is low, primarily constrained by significant technical disparities. Key differences include an increase in access time and write cycle time from 8 ns to 15 ns. This further reduction in speed may create system performance bottlenecks or fail to meet the original design's timing requirements, especially in high-bandwidth or low-latency scenarios. Concurrently, the package change from 48-TFBGA (6x8 mm) to 48-CABGA (9x9 mm) introduces a higher degree of physical incompatibility. Direct replacement is likely unfeasible and would require PCB layout modifications or an external adapter. This substitution should only be considered for low-speed applications where hardware redesign is permissible. Otherwise, priority should be given to selecting a more compatible alternative.
Analysis ID: 74FD-BAD2000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com