Original Part
Alternative Part
1. LM2904DT Substitution Conclusion
In the vast majority of general-purpose applications, the LM2904DT can directly replace the LM358ADR. Their core parameters—supply voltage range (3-30V), number of channels, and input offset voltage—are identical. The LM2904DT offers a higher slew rate (0.6 V/µs vs. 0.3 V/µs), providing superior performance in responding to rapidly changing signals. The primary trade-off is that the LM2904DT exhibits a 40% higher quiescent current (700 µA vs. 500 µA). In power-sensitive applications, such as battery-operated systems, this substitution will increase overall power consumption and reduce battery life, which must be carefully evaluated. For applications where power consumption is not a critical constraint, the LM2904DT is a suitable drop-in replacement.
2. BA2904F-E2 Substitution Conclusion
The BA2904F-E2 can functionally replace the LM358ADR, but the performance degradation must be carefully assessed for the specific application. Its key disadvantages are a lower slew rate (0.2 V/µs) and a lower gain-bandwidth product (500 kHz) compared to the original part. This results in slower response times when processing high-frequency or fast transient signals, potentially leading to signal distortion. Furthermore, its output drive capability is weaker (30 mA vs. 40 mA), which may be insufficient for driving heavy loads. Its advantages include a slightly wider supply voltage range (up to 32V) and a quiescent current matching the original part. Substitution should only be considered in low-frequency, static, or light-load circuits where signal speed, frequency response, and output current are not critical requirements.
Analysis ID: 05C7-B834000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com