Original Part
Alternative Part
1. ISL4485EIBZ Substitution Conclusion
The ISL4485EIBZ can functionally and mechanically replace the SN75ALS176BDR, with key differences including a higher data rate (20 Mbps; the original part does not specify a rate but typically operates below this) and greater receiver hysteresis (70 mV vs. 60 mV). The increased data rate enables the ISL4485EIBZ to support higher-speed communication applications, while the enhanced hysteresis improves noise immunity, making it suitable for more demanding electrical environments. Its wider supply voltage range (4.5 V–5.5 V) also provides greater voltage adaptability. However, attention should be paid to whether the driver characteristics are fully compatible; in low-speed applications or those sensitive to signal thresholds, actual waveform validation may be required.
2. SP483EEN-L/TR Substitution Conclusion
The SP483EEN-L/TR is mechanically and protocol-compatible, but critical differences include a significantly lower data rate (250 kbps) and reduced receiver hysteresis (20 mV vs. 60 mV). The lower data rate restricts it to low-speed communication scenarios and cannot meet high-speed transmission requirements. The reduced hysteresis weakens noise immunity, potentially increasing the risk of false triggering in noisy environments. If the original application operates at low speed in a low-noise condition and the voltage range matches (4.75 V–5.25 V), substitution may be considered. Otherwise, this replacement represents a performance downgrade.
Analysis ID: 1F99-0D81000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com