Original Part
SDRAM - DDR Memory IC 128Mbit Parallel 200 MHz 700 ps 66-TSOP II
Alternative Part
1. W9412G6KH-5 Substitution Conclusion
The feasibility of substituting the original AS4C8M16D1A-5TCNTR with the W9412G6KH-5 is low, primarily due to key technical differences. First, regarding the memory interface, the W9412G6KH-5 explicitly specifies an SSTL_2 interface, while the original part is described with a "Parallel" interface. SSTL_2 is the standard electrical interface for DDR SDRAM (operating at 2.5V levels). Although the voltage ranges align (2.3V–2.7V), it is essential to verify that the original system is compatible with the SSTL_2 signaling specification; otherwise, signal integrity issues may arise. Second, there is a significant disparity in access time: the W9412G6KH-5 has an access time of 50 ns, which is substantially slower than the original's 700 ps (0.7 ns). The high latency of the Winbond device when responding to read requests could lead to timing violations, severe performance degradation, or unstable operation in high-speed systems (e.g., those running at 200 MHz clock frequencies). Therefore, direct substitution is not viable unless the application has extremely low memory speed requirements.
2. W9412G6KH-5 TR Substitution Conclusion
The feasibility of substituting the original AS4C8M16D1A-5TCNTR with the W9412G6KH-5 TR is similarly low, as the technical differences are identical to those of the W9412G6KH-5: the interface is SSTL_2 versus Parallel, requiring verification of electrical compatibility; the access time is 50 ns versus 700 ps, where the substantial latency gap could cause system failures. Although the "TR" suffix typically denotes tape-and-reel packaging, which affects only assembly and supply chain processes without altering electrical characteristics, the substitution conclusion remains the same as for the W9412G6KH-5. Consequently, substitution is not recommended in high-speed applications unless the system design can tolerate significantly reduced access speeds.
Analysis ID: 4C92-01D7000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com