Original Part
Alternative Part
1. LM2902DRG3 Substitution Conclusion
The LM2902DRG3 can serve as a partial substitute for the LM324ADT, but several key differences must be considered: its supply voltage range is limited to 26V maximum (compared to 30V for the LM324ADT), output current is 30mA (versus the original 40mA), and input offset voltage is 3mV (slightly higher than the original 2mV). Applications operating near 30V supply or requiring higher load current may pose risks, and additional calibration might be necessary in precision‑sensitive circuits. However, the LM2902DRG3 offers slightly lower power consumption (1.4mA vs. 1.5mA), comparable bandwidth (1.2MHz) and slew rate (0.5V/µs), and is package‑compatible. Therefore, in general‑purpose amplifier circuits with supply voltage ≤26V and load current ≤30mA, it can essentially be used as a drop‑in replacement.
2. AS324AMTR‑E1 Substitution Conclusion
The AS324AMTR‑E1 presents a favorable substitution option: its supply voltage range extends up to 36V (exceeding the original 30V), output current matches the original at 40mA, and input offset voltage (2mV) and bias current (20nA) align with the prototype. It also features lower quiescent current (1mA vs. 1.5mA). Note, however, that its slew rate is not specified, which may affect dynamic response in high‑frequency or fast‑signal applications and requires additional verification. Given its full package compatibility, the AS324AMTR‑E1 can be prioritized in designs emphasizing low power consumption, wide supply voltage operation, or static parameter matching—provided dynamic performance is verified to meet application requirements.
Analysis ID: F7C5-5429000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com