Original Part
Alternative Part
1. LM258DG4 Substitution Conclusion
The LM258DG4, as a general-purpose dual op-amp, offers basic compatibility with the TS512AIDT in terms of supply range (3V-32V) and quiescent current (500µA per channel). However, its key performance parameters are significantly inferior to those of the original part. Its input offset voltage is as high as 3mV (compared to 500µV for the TS512), which can lead to substantial degradation in DC accuracy. Furthermore, its gain bandwidth product is only 1.1MHz (vs. 3MHz for the TS512) and its slew rate is merely 0.3V/µs (vs. 1.5V/µs), resulting in poor bandwidth and dynamic response that cannot meet mid-frequency signal processing requirements. Additionally, the LM258DG4 lacks AEC-Q100 automotive-grade qualification. Consequently, it is only suitable for non-automotive applications with extremely low demands for precision and speed, making it a poor overall substitute.
2. ADTL082ARZ-REEL7 Substitution Conclusion
The ADTL082ARZ-REEL7 is a JFET-input dual op-amp. Its strengths lie in its extremely high input impedance (input bias current of just 2pA) and excellent dynamic performance (slew rate of 20V/µs, gain bandwidth product of 5MHz), which are far superior to the TS512AIDT, making it suitable for high-speed, high-impedance signal source applications. However, its minimum operating voltage is 8V (the TS512 can operate down to 3V), preventing compatibility with low-voltage systems. Its quiescent current is 1.2mA per channel (vs. 500µA for the TS512), leading to significantly higher power consumption. Moreover, its input offset voltage (1.5mV) is poor, and it also lacks automotive-grade certification. Therefore, it is only applicable to non-automotive designs requiring high speed and operating at higher supply voltages. It cannot directly substitute for the TS512AIDT in precision or low-voltage environments.
Analysis ID: 74AB-474F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com