Original Part
Alternative Part
1. OP213ESZ-REEL7 Substitution Conclusion
For general-purpose dual op-amp applications, the OP213ESZ-REEL7 represents a viable technical alternative, though certain conditions must be considered. Its core advantage lies in its rail-to-rail output capability, which provides a wider dynamic output range under single-supply or low-voltage operation. Furthermore, its input offset voltage (100 µV) is significantly better than the original part (500 µV), contributing to improved system DC accuracy. The key differences are its input bias current (240 nA), which is nearly five times higher than the original (50 nA). This may introduce larger input error currents in applications with high source impedance. Additionally, its minimum operating voltage (4V) is higher than the original's (3V), precluding direct substitution in 3V single-supply systems. If the application circuit operates at a supply voltage ≥4V and does not have stringent high-input-impedance requirements, this part can be considered a performance-focused upgrade.
2. AD8682ARZ Substitution Conclusion
The AD8682ARZ, a JFET-input operational amplifier, serves as a high-performance alternative for specific applications but offers poor general-purpose compatibility and is unsuitable for direct replacement. Its most prominent advantage is an extremely low input bias current (6 pA), four orders of magnitude lower than the original part (50 nA). This makes its performance far superior in applications demanding very high input impedance, such as photodetection or integrator circuits. The primary limitation is its minimum operating voltage (9V), which is substantially higher than the original's (3V), rendering it completely unusable in common low-voltage systems like 3.3V or 5V. Furthermore, its output drive current (12 mA) is only about half that of the original (23 mA), resulting in weaker heavy load drive capability. It is a feasible specialized substitute only when the system supply voltage exceeds 9V and there is a mandatory requirement for ultra-low input bias current.
Analysis ID: EAD2-5D91000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com