Original Part
Alternative Part
1. TS1872IYPT Substitution Conclusion
The TS1872IYPT can serve as a functional replacement for the TLV2313IDGKT, but the performance differences must be considered. Its key advantages include higher output current (80 mA vs. 15 mA), a wider supply voltage range (1.8–6 V vs. 1.8–5.5 V), greater bandwidth (1.8 MHz vs. 1 MHz), and higher slew rate (0.6 V/µs vs. 0.5 V/µs), resulting in stronger drive capability, better dynamic response, and improved supply flexibility. It is also AEC-Q100 qualified, making it suitable for automotive applications. However, its quiescent current is significantly higher (500 µA vs. 65 µA), which increases power consumption and makes it unsuitable for battery-powered or ultra-low-power designs. The input bias current is also larger (70 nA vs. 1 pA), which may affect precision in high-impedance signal paths. If the application is not sensitive to power consumption or input current, and requires higher output capability or automotive-grade reliability, the TS1872IYPT is a viable alternative.
2. TSV358AIST Substitution Conclusion
The TSV358AIST shares package compatibility (both 3 mm wide) and similar output characteristics (80 mA output current, rail-to-rail output) with the TLV2313IDGKT, and is also AEC-Q100 qualified. However, a key limitation is its minimum operating voltage of 2.5 V (compared to 1.8 V for the TLV2313), which prevents its use in systems operating between 1.8 V and 2.5 V. Other differences include higher quiescent current (500 µA vs. 65 µA) and higher input bias current (70 nA vs. 1 pA), leading to increased power consumption and reduced suitability for high-precision, high-impedance applications. Its bandwidth (1.4 MHz) and slew rate (0.6 V/µs) are slightly better than the original part. The TSV358AIST is only recommended for applications where the supply voltage remains above 2.5 V and where power consumption and input current are not critical; otherwise, direct substitution is not advised.
Analysis ID: 6A42-1091000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com