Original Part
Alternative Part
1. BA2904SFVM-TR Substitution Conclusion
The BA2904SFVM-TR can serve as a limited substitute for the original part; however, attention must be paid to its degraded key performance, which may affect dynamic response and drive capability. The differences include: a reduction in slew rate from 0.3 V/µs to 0.2 V/µs, and a drop in gain-bandwidth product from 700 kHz to 500 kHz, indicating slower signal processing and weaker high-frequency response; output current is lowered from 40 mA to 30 mA, potentially limiting drive capability for heavy loads; the maximum supply voltage is reduced from 36 V to 32 V, decreasing operating voltage margin. If the application is not sensitive to bandwidth, transient response, or high-voltage requirements, and load current is relatively low, this device can be substituted based on its pin compatibility and lower quiescent current (500 µA).
2. LM358PWRG4-JF Substitution Conclusion
The LM358PWRG4-JF is a highly viable alternative to the original part, with good core performance matching, though input accuracy and package differences should be noted. Its slew rate (0.3 V/µs) and gain-bandwidth product (700 kHz) match the original, ensuring similar frequency response; output current (40 mA) and supply current (500 µA) are also comparable. The main differences are an increase in input offset voltage from 2 mV to 3 mV, which may slightly reduce DC accuracy; the maximum supply voltage is lowered from 36 V to 30 V, limiting high-voltage applications; additionally, the package width increases from 3.00 mm to 4.40 mm (TSSOP), which may affect PCB layout compatibility. For non-high-voltage, non-high-precision applications, this device can be considered a direct replacement.
Analysis ID: 1D81-06CF000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com