Original Part
Alternative Part
1. LM358PW Substitution Conclusion
The LM358PW is a viable and excellent substitute in most general-purpose applications. The core differences from the original part are its lower maximum supply voltage (30V vs. 36V) and a slightly higher input offset voltage (3mV vs. 2mV). The reduced voltage headroom poses a risk if the original circuit operates near or above 30V. The marginal degradation in offset voltage has minimal impact in applications not requiring stringent DC precision.
Critically, its key dynamic performance parameters—gain bandwidth product and slew rate—as well as its output drive capability, are identical to the original. Furthermore, its lower quiescent current (500µA vs. 700µA) contributes to reduced system power consumption. The package is fully compatible.
Provided the actual operating voltage is confirmed not to exceed 30V, the LM358PW represents a highly reliable, more power-efficient direct replacement.
2. BA2904SFV-E2 Substitution Conclusion
The BA2904SFV-E2 offers lower substitution feasibility and is suitable only for applications with relaxed performance requirements. Several key specifications are downgraded: both slew rate (0.2V/µs vs. 0.3V/µs) and gain bandwidth product (500kHz vs. 700kHz) are lower. This results in slower response to high-frequency or fast transient signals and a narrower effective bandwidth. Additionally, its output current capability is reduced (30mA vs. 40mA), diminishing its ability to drive heavy loads.
While its quiescent current is comparable to the LM358PW and its maximum supply voltage (32V) is slightly better than the TI part's, the comprehensive reduction in critical performance metrics prevents it from matching the original's performance level. The package (8-LSSOP) is the same size, but pin-to-package compatibility with an 8-TSSOP must be verified.
In summary, this is not an equivalent substitute. It should be considered only for low-cost solutions where speed and drive capability are not critical.
Analysis ID: FFB0-5588000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com