Original Part
Alternative Part
1. LT1354CS8 Substitution Conclusion
Direct substitution is not recommended. The LT1354CS8 exhibits significant deviations from the original AD818ARZ-REEL in key performance parameters: its gain-bandwidth product is only 12 MHz, substantially lower than the AD818’s 130 MHz –3 dB bandwidth, rendering it unsuitable for video or high-frequency applications where signal fidelity is critical. Furthermore, the LT1354CS8 provides an output current of 30 mA, compared to the AD818’s 50 mA, resulting in inferior drive capability. Its supply voltage range is also slightly narrower, with an upper limit of 30 V versus the AD818’s 36 V. These differences indicate that the LT1354CS8 is only appropriate for low-frequency, low-power scenarios and cannot meet the high-bandwidth, high-drive requirements of the original design.
2. LT1354CS8TR Substitution Conclusion
The conclusion is identical to that for the LT1354CS8—direct substitution is not feasible. The LT1354CS8TR shares identical electrical specifications and package with the LT1354CS8 (only differing in tape-and-reel packaging). Consequently, it suffers from the same limitations in critical performance areas such as bandwidth, output current, and voltage range. Its low bandwidth (12 MHz) and low output current (30 mA) preclude its use in the original high-frequency or high-load circuits. Forcing a substitution could lead to signal distortion or drive failure. It may be considered as an alternative only for low-frequency, low-power designs, but system compatibility must be thoroughly re-evaluated.
Analysis ID: 7033-8F40000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com