Original Part
Alternative Part
1. OPA602AU Substitution Conclusion
The OPA602AU matches the AD8610ARZ in package compatibility (both 8-SOIC) and quiescent current (3 mA). However, key performance parameters differ significantly: its gain-bandwidth product (6.5 MHz) is only about one-quarter that of the AD8610ARZ (25 MHz), and its slew rate (35 V/µs) is also lower, which may result in insufficient bandwidth and response speed in high-frequency or fast-transient signal processing applications. Additionally, its input offset voltage (1 mV) is substantially higher than that of the AD8610ARZ (85 µV), introducing greater DC error and degrading accuracy in precision amplification circuits. The output current (20 mA) is also lower, indicating weaker drive capability. This device is only suitable for general-purpose, low-frequency applications where precision is not critical, and cannot meet the design requirements of high-frequency or high-precision signal chains.
2. OPA602AU/2K5 Substitution Conclusion
The OPA602AU/2K5 shares identical electrical parameters with the OPA602AU, differing only in packaging quantity (2K5 denotes a 2500-unit tape-and-reel format). Therefore, the technical substitution conclusion remains the same: its gain-bandwidth product (6.5 MHz) and slew rate (35 V/µs) are significantly lower than those of the AD8610ARZ, limiting high-frequency signal handling capability. The input offset voltage (1 mV) is more than an order of magnitude worse, degrading DC accuracy. The output current (20 mA) is also comparatively low. Although it offers a wider supply voltage range (10–36 V) and is package-compatible, the core performance gap is substantial. It can only be used in non-critical general-purpose amplification scenarios and is not a suitable direct replacement for JFET amplifier applications requiring high bandwidth, high precision, or strong drive capability.
Analysis ID: 59CA-BDAD000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com