Original Part
General Purpose Digital Isolator 3000Vrms 1 Channel 25Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
Alternative Part
General Purpose Digital Isolator 3750Vrms 1 Channel 15Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
General Purpose Digital Isolator 3000Vrms 1 Channel 25Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
1. SI8718BC-A-ISR Substitution Conclusion
Direct substitution is not recommended. While the SI8718BC-A-ISR offers advantages in isolation withstand voltage (3750Vrms vs. 3000Vrms) and common-mode transient immunity (35kV/µs vs. 25kV/µs), it exhibits significant shortcomings in key communication performance metrics: its data rate (15Mbps) is lower than the original part's (25Mbps), and its pulse width distortion (25ns) is considerably worse than the original's (4ns). This device cannot support the high-speed or high-timing-accuracy signal transmission potentially required by the original design, representing a downgrade in communication bandwidth and signal fidelity. Furthermore, it lacks AEC-Q100 automotive-grade qualification, failing to meet the reliability requirements for the automotive applications targeted by the original component.
2. ISO7310FCD Substitution Conclusion
For non-automotive applications, it can serve as a direct substitute. The ISO7310FCD is fully identical to the original ISO7310FCQDQ1 in all core technical parameters, including isolation voltage, data rate, timing characteristics (propagation delay, pulse width distortion), and supply range. It is also package-compatible, enabling a pin-to-pin replacement. The sole, yet critical, difference lies in the qualification level: the ISO7310FCD is standard industrial-grade, whereas the "Q1" suffix on the original part indicates it has passed AEC-Q100 automotive-grade certification. For target applications in industrial, consumer electronics, or other non-automotive fields, the ISO7310FCD is a functionally and performance-equivalent alternative. However, for use in automotive electronic systems, a part with AEC-Q100 certification is mandatory, in which case the ISO7310FCD does not qualify.
Analysis ID: ACE3-3A55000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com