Original Part
Alternative Part
1. LM258ADRE4 Substitution Conclusion
Overall, the LM258ADRE4 is a viable and nearly perfect drop-in replacement, as it matches or exceeds the key performance parameters of the original part. The specific improvements are as follows: It offers a higher gain-bandwidth product (700kHz vs. 500kHz) and slew rate (0.3V/µs vs. 0.2V/µs), resulting in faster dynamic response and stable operation at higher signal frequencies. Its input bias current is significantly lower (15nA vs. 45nA), which minimizes loading effects on high-impedance sources and reduces errors caused by bias current. The quiescent current is lower (500µA vs. 700µA), leading to better power efficiency. Furthermore, it provides stronger output drive capability (40mA vs. 20mA), enabling it to handle heavier loads. One note for PCB layout: its package width (3.90mm) is slightly narrower than the original part (4.40mm), so mechanical compatibility should be verified.
2. LM258DG4 Substitution Conclusion
The LM258DG4 is a suitable replacement, offering advantages in dynamic performance and power efficiency over the original part. However, a slight degradation in a key precision parameter should be noted. Its primary benefits are similar to those of the LM258ADRE4, with an even higher gain-bandwidth product (1.1MHz) for the best dynamic performance. The critical difference is its input offset voltage, which is slightly higher (3mV) compared to the original part (2mV) and the LM258ADRE4 (2mV). In applications demanding extremely high DC precision, such as low-level signal amplification, this may introduce a marginally larger initial error. This can typically be mitigated using offset nulling or calibration circuits. Its other advantages—lower quiescent current, stronger output drive, etc.—are identical to the LM258ADRE4. The same attention should be paid to the package width discrepancy.
Analysis ID: 3C52-B121000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com