Original Part
Alternative Part
1. MTA206P Substitution Conclusion
The MTA206P can directly replace the original part in terms of electrical performance and mechanical endurance. It offers a higher AC current rating (6A AC vs. 5A AC), longer electrical life (60,000 cycles vs. 50,000 cycles), and a nickel-plated contact finish (with performance comparable to the original chromium plating). However, a key difference is the absence of a specified ingress protection (IP) rating, whereas the original part is rated IP67 (dust-tight and waterproof). In applications involving dust, moisture, or water splash, the MTA206P may not provide the same level of environmental sealing reliability. Actual operating conditions should be evaluated before substitution.
2. 5649AB Substitution Conclusion
The 5649AB generally meets the substitution requirements electrically, with a higher AC current rating (6A AC) and a slightly higher DC voltage rating (30V DC vs. 28V DC) than the original part, while maintaining the same mechanical life (50,000 cycles). The primary differences are the lack of a certified IP rating and a slightly larger panel cutout diameter (6.50mm vs. 6.35mm), which requires verification of mounting compatibility. This substitute is suitable for non‑demanding environments. However, if the original design relies on IP67 sealing for environmental protection, direct substitution may pose a risk to environmental adaptability.
Analysis ID: EDBF-EE95000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com