Original Part
Alternative Part
1. LMV358M8G-13 Substitution Conclusion
From the perspective of core electrical parameters, the LMV358M8G-13 is a highly viable direct replacement. However, package compatibility must be rigorously evaluated. It is fully aligned with the original part in key specifications such as gain bandwidth product (1 MHz), slew rate (1V/µs), input bias current (15 nA), and supply voltage range (2.7V-5.5V). Consequently, there is no difference in AC performance, precision, or supply requirements for most general-purpose amplifier circuits. Its notable advantages include superior output drive capability (90 mA vs. 40 mA), enabling it to drive heavier loads, and a slightly lower quiescent supply current (190µA vs. 210µA), which benefits overall system power consumption. The primary constraint is its package: it uses a narrower-body 8-MSOP (3.00mm wide) with a different land pattern compared to the original 8-TSSOP (4.40mm wide). A pad-for-pad replacement is not possible. The PCB layout must be modified to accommodate the new package; otherwise, assembly will be unfeasible.
2. LMV358LIST Substitution Conclusion
The LMV358LIST exhibits some parametric differences and can serve as an alternative, but its dynamic performance and precision must be validated for the specific application. Its gain bandwidth product (1.3 MHz) is slightly higher than the original, which may benefit applications requiring somewhat wider bandwidth. However, its slew rate (0.7V/µs) is 30% lower, slowing the amplifier's response to large-signal steps. This can lead to increased distortion in the output waveform during high-speed transitions, making it unsuitable for applications with stringent signal slope requirements. Furthermore, its input bias current (27 nA) is significantly higher. In applications with high-impedance signal sources, this will generate a larger input error current, potentially degrading DC accuracy. Conversely, its input offset voltage (1 mV) is superior, which can improve DC precision. Both its output current (70 mA) and quiescent current (130µA) outperform the original part, offering stronger load drive capability and lower internal power dissipation, respectively. Similar to the LMV358M8G-13, it also uses the narrow-body 8-MSOP package, presenting the same PCB layout compatibility issue.
Analysis ID: A67C-32F5000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com