Original Part
10 MHz XO (Standard) LVCMOS, LVTTL Oscillator 2.5V Enable/Disable 4-SMD, No Lead
Alternative Part
10 MHz XO (Standard) LVCMOS, LVTTL Oscillator 2.8V Enable/Disable 4-SMD, No Lead
10 MHz XO (Standard) LVCMOS, LVTTL Oscillator 2.8V Enable/Disable 4-SMD, No Lead
1. SIT8208AI-G1-28E-10.000000X Substitution Conclusion
This part can serve as a conditional substitute for the original device. The key difference lies in the supply voltage, which has changed from 2.5V to 2.8V. All other critical parameters—frequency, stability, output type, package footprint, and current characteristics—remain identical. If the target system’s power rail only supports 2.5V, a direct replacement may result in insufficient supply or timing anomalies. If the system is compatible with 2.8V or has sufficient voltage headroom, the substitution is acceptable. However, note that power consumption may increase slightly due to the higher operating voltage.
2. SIT8208AI-G1-28E-10.000000Y Substitution Conclusion
The substitution conclusion for this device is identical to that of the X variant above, as both share the same parameter set, including voltage, frequency, package, and current ratings. The only distinction is the suffix “Y” instead of “X,” which typically denotes a production lot, internal code, or minor test specification difference and does not affect electrical or physical performance. Therefore, its substitution feasibility likewise depends on the system’s compatibility with a 2.8V supply. In practical applications, it can be considered equivalent to the X variant.
Analysis ID: 3C46-88A7000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com