Original Part
33 MHz XO (Standard) LVCMOS, LVTTL Oscillator 2.5V Enable/Disable 4-SMD, No Lead
Alternative Part
33 MHz XO (Standard) LVCMOS, LVTTL Oscillator 1.8V Enable/Disable 4-SMD, No Lead
33 MHz XO (Standard) LVCMOS, LVTTL Oscillator 1.8V Enable/Disable 4-SMD, No Lead
1. SIT8208AI-G1-18E-33.000000T Substitution Conclusion
This part can serve as a direct replacement for the original part. The key differences are the supply voltage, which is reduced from 2.5V to 1.8V, and a slight decrease in maximum operating current from 33mA to 31mA. If the target system's power design only supports a 2.5V rail, the supply voltage must be adjusted or level compatibility confirmed. If the system already supports 1.8V operation, the substitution can achieve lower power consumption. However, note that the high‑level threshold of the output (LVCMOS/LVTTL) at 1.8V may pose a logic‑matching risk with the original 2.5V system; receiver noise margin should be verified. All other core parameters (frequency, stability, package, enable function) remain identical, and physical compatibility is not an issue.
2. SIT8208AI-G1-18E-33.000000X Substitution Conclusion
This part shares identical technical specifications with the "T" suffix version, including the same critical change from 2.5V to 1.8V supply voltage. The different suffix typically indicates non‑electrical variations such as temperature range, packaging, or production lot, but according to the provided datasheet, there is no electrical difference. Therefore, the substitution conclusion aligns with that for the "T" part: system power adaptation and signal‑level compatibility must be carefully evaluated. Replacement is feasible provided the supply condition is suitable and logic levels are matched; otherwise, level‑shifting or power‑rail adjustment will be required.
Analysis ID: B909-4359000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com