Original Part
Alternative Part
1. BA2904FV-E2 Substitution Conclusion
The BA2904FV-E2 closely matches the LM2904PT in static parameters such as input bias current (20 nA), offset voltage (2 mV), supply current (700 µA), output current (30 mA), and supply voltage range (3–32 V, slightly wider than the original 3–30 V). Package dimensions are also similar (8-LSSOP vs. 8-TSSOP, both 4.40 mm wide, with generally compatible pinouts), making it a viable direct replacement for low-frequency or DC applications.
However, its slew rate (0.2 V/µs) and gain-bandwidth product (500 kHz) are notably lower than those of the original part (0.6 V/µs and 800 kHz). This results in slower dynamic response and reduced high-frequency signal handling capability, which may preclude its use in circuits requiring fast transient response (e.g., audio processing or high-speed sensing) or wider bandwidth. For applications limited to low-speed signal amplification, substitution remains feasible.
2. NCV2904DMR2G Substitution Conclusion
The NCV2904DMR2G offers advantages in dynamic performance: its slew rate (0.6 V/µs) matches the original, gain-bandwidth product (1 MHz) is higher, output current (40 mA) is greater, and supply voltage range (3–32 V) is slightly wider. This suggests potential improvements in signal response speed, bandwidth, and drive capability compared to the original part.
However, differences include higher input offset voltage (7 mV) and bias current (45 nA), which degrade amplification accuracy and increase input error. Supply current (1.5 mA) is also significantly higher than the original (700 µA), implying increased power consumption. Additionally, the package differs in size (8-MSOP, 3.00 mm wide vs. original 8-TSSOP, 4.40 mm wide), making it physically incompatible and likely requiring PCB redesign.
Substitution may be acceptable in applications where lower precision and higher power consumption are tolerable and where the package can be adapted. For high-precision or low-power designs, direct replacement is not recommended.
Analysis ID: 4B8B-4C6F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com