Original Part
Alternative Part
1. TL074CD Substitution Conclusion
The feasibility of substituting TL074CD for LM2902EDR2G is low, primarily due to significant differences in key technical specifications. The TL074CD is a J-FET input amplifier, featuring extremely low input bias current (65 pA vs. 90 nA for LM2902) and superior dynamic performance (slew rate of 13 V/µs, gain-bandwidth product of 5.25 MHz). It is more suitable for high-impedance signal sources and high-frequency applications. However, the TL074CD has a narrower supply voltage range (10–30 V vs. 3–32 V for LM2902) and weaker output current capability (not explicitly stated but typically below 40 mA). This may prevent direct substitution in low-voltage designs or when driving heavy loads such as relays or LEDs, requiring reassessment of supply and load compatibility.
2. TL084CD Substitution Conclusion
The feasibility of substituting TL084CD for LM2902EDR2G is similarly limited. Key differences include amplifier type (J-FET vs. general-purpose), input bias current (30 pA vs. 90 nA), and output current (10 mA vs. 40 mA). The TL084CD may perform better in precision, high-impedance applications. However, its supply voltage range (10–30 V) is narrower and cannot support the LM2902’s wide operating range down to 3 V. Additionally, its lower output current may be insufficient to drive high-current loads. While the TL084CD offers a gain-bandwidth product of 3 MHz and a slew rate of 13 V/µs, making it suitable for mid-to-high frequency use, it cannot directly replace the LM2902 in applications requiring very wide voltage adaptability or strong output drive capability.
Analysis ID: 0475-6BB4000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com