Original Part
100 MHz XO (Standard) LVDS Oscillator 2.5V Enable/Disable 6-SMD, No Lead
Alternative Part
100 MHz XO (Standard) LVDS Oscillator 2.5V Enable/Disable 6-SMD, No Lead
100 MHz XO (Standard) LVDS Oscillator 2.5V Enable/Disable 6-SMD, No Lead
1. XLM328100.000000X Substitution Conclusion
From the perspective of core electrical parameters, interface, and physical package, the XLM328100.000000X can serve as a direct pin-to-pin replacement for the original component. All key specifications are fully aligned: frequency, output type, voltage, frequency stability, and package dimensions are identical. The primary technical distinction lies in the maximum operating current, which is 34mA for the Renesas part, significantly lower than the 66mA of the original CTS component. This substitution will lead to a substantial reduction in system power consumption. This is a beneficial improvement for power-sensitive or thermally constrained applications and does not introduce any drive capability or compatibility issues. The replacement is entirely feasible from both electrical and mechanical standpoints. However, it is recommended to validate its compatibility with the target load circuit and long-term reliability in new designs.
2. XLL328100.000000X Substitution Conclusion
The feasibility of substituting with the XLL328100.000000X is identical to the conclusion for the XLM part described above. Based on the provided data, its parameters are fully consistent with those of the XLM328100.000000X. The core difference from the original component similarly centers on the power consumption advantage conferred by the lower maximum operating current (34mA vs. 66mA). It also represents a low-power, drop-in replacement option matching the original in specifications and package. For practical selection, it is necessary to confirm with the manufacturer whether there are any differences between the XLM and XLL series not reflected in the basic parameters—such as operating temperature range, shock/vibration tolerance, or internal design margin. Board-level testing should be conducted prior to volume replacement to verify performance in the specific application environment.
Analysis ID: 641B-4BE6000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com