Original Part
Alternative Part
1. OPA2313IDGK Substitution Conclusion
The OPA2313IDGK can serve as a potential substitute for the TS1852AIST, but key differences must be noted. Its output current (15 mA) is only 31% of the original part's (48 mA), and its maximum supply voltage (5.5 V) is lower than the original's (6 V). This may limit its use in applications requiring high load drive or significant supply headroom. However, it offers an extremely low input bias current (0.2 pA) and superior offset voltage (500 µV), making it suitable for high-impedance sensor interfaces or precision signal conditioning. Furthermore, its higher gain-bandwidth product (1 MHz) and slew rate (0.5 V/µs) can improve frequency response and dynamic performance. Its lower quiescent current (50 µA) is also beneficial for battery-powered systems. In summary, if the application does not require high output current and operates at a supply voltage ≤5.5 V, this device provides advantages in precision, power consumption, and bandwidth.
2. NCS20092DMR2G Substitution Conclusion
The NCS20092DMR2G excels in low-power characteristics, but its overall performance shows a significant gap compared to the TS1852AIST. Its gain-bandwidth product (350 kHz) and slew rate (0.15 V/µs) are both lower than the original part's specifications (630 kHz, 0.25 V/µs), which may impair high-frequency signal response. Its output current (8.5 mA) is only 18% of the original's, severely limiting its drive capability. While it offers better input bias current (1 pA) and offset voltage (500 µV), along with an extremely low quiescent current (23 µA)—making it suitable for micropower precision measurement—its maximum supply voltage (5.5 V) is also lower than the original. Substitution is only recommended in applications with low signal frequencies, very light loads, and extreme sensitivity to power consumption. Careful evaluation of dynamic performance and load compatibility is essential.
Analysis ID: A3A0-32BB000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com