Original Part
Alternative Part
1. LT1167AIS8 Substitution Conclusion
The LT1167AIS8 is a highly viable substitute as it exhibits strong compatibility with the original AD621BRZ in key parameters: both share a slew rate of 1.2 V/µs, the same supply voltage range (4.6 V to 36 V), the same 8-SOIC package, and identical supply current (900 µA). Differences include a significantly lower input bias current for the LT1167AIS8 (50 pA vs. 500 pA), which reduces loading on the signal source and makes it more suitable for high-impedance sensor applications; lower input offset voltage (15 µV vs. 50 µV), improving DC accuracy and signal conditioning precision; and higher output current (27 mA vs. 18 mA), enhancing load-driving capability. In terms of bandwidth, the LT1167AIS8 offers a gain-bandwidth product of 1 MHz, while the AD621BRZ has a –3 dB bandwidth of 800 kHz; in practice, these can generally be considered equivalent or slightly favorable to the LT1167AIS8. Thus, while maintaining core performance, the LT1167AIS8 provides advantages in precision, drive strength, and input characteristics, allowing substitution without additional adjustments.
2. INA118UB/2K5 Substitution Conclusion
The INA118UB/2K5 can serve as an alternative, but its technical differences must be weighed against the application requirements. It matches the AD621BRZ in bandwidth (800 kHz) and package compatibility (8-SOIC). However, it has a lower slew rate (0.9 V/µs vs. 1.2 V/µs), which may result in slightly slower response in high-speed or transient signal processing. Its input bias current is higher (1 nA vs. 500 pA), increasing signal source loading and potentially affecting high-impedance measurement accuracy. On the other hand, its input offset voltage is lower (10 µV vs. 50 µV), benefiting DC precision. Additionally, the INA118UB/2K5 draws significantly lower supply current (350 µA vs. 900 µA), making it suitable for low-power or battery-operated systems, and offers a wider supply voltage range (2.7 V to 36 V), supporting lower-voltage operation and enhancing design flexibility. Its output current, however, is lower (12 mA vs. 18 mA), which may limit its ability to drive heavy loads. Overall, if the application prioritizes power efficiency and low-voltage operation, and does not demand high speed or strong drive capability, the INA118UB/2K5 is a feasible substitute.
Analysis ID: 9ABF-7E2D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com