Original Part
Alternative Part
1. LM358ST Substitution Conclusion
The LM358ST can serve as a substitute for the MC33078DGKR, but only in applications that are low-frequency, non-precision, power‑sensitive, and require automotive‑grade reliability. Key differences include: gain‑bandwidth product (800 kHz vs. 16 MHz) and slew rate (0.6 V/µs vs. 7 V/µs) are more than an order of magnitude lower, making the LM358ST unsuitable for high‑frequency signals or fast transients, which may cause waveform distortion; input offset voltage (2 mV vs. 150 µV) is over 10 times higher, introducing significant DC error and precluding use in precision amplification. However, its lower input bias current (20 nA vs. 300 nA) benefits high‑impedance sensing, and lower quiescent current (700 µA vs. 2.05 mA) reduces system power consumption. Additionally, it complies with AEC‑Q100 and supports a wider lower supply voltage (3 V vs. 10 V), making it suitable for automotive or battery‑powered, low‑cost applications where high voltage tolerance is not required.
2. LM2904YST Substitution Conclusion
The LM2904YST exhibits parameters highly similar to the LM358ST, and the substitution conclusion is essentially the same: it is only suitable for low‑frequency, non‑precision, automotive‑grade, or wide‑supply‑voltage scenarios, and cannot handle high‑frequency or high‑precision applications. Compared to the MC33078DGKR, its gain‑bandwidth product (700 kHz) and slew rate (0.6 V/µs) are severely limited, constraining signal bandwidth and dynamic response. The high offset voltage (2 mV) leads to poor DC accuracy. Advantages likewise include low input bias current (20 nA), low quiescent power (700 µA), automotive qualification, and a wide operating voltage range (3–30 V). An additional note: its output current (30 mA) is slightly lower than that of the MC33078DGKR (37 mA), which may affect its ability to drive heavy loads.
Analysis ID: D956-B968000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com