(HKG) +86 755 8277 4696
WhatsAppWhatsApp
English
SkyChip
0
Original Part

J-FET Amplifier 1 Circuit 8-SOIC

Quote
Alternative Part

J-FET Amplifier 1 Circuit 8-SO

Quote

Standard Amplifier 1 Circuit 8-SO

Quote
1. LT1122CS8TRPBF Substitution Conclusion Direct substitution is not recommended. While both devices are J-FET input operational amplifiers with compatible packages, key differences make a direct replacement risky. The quiescent current of the LT1122 (7.8 mA) significantly exceeds that of the TLE2071 (1.7 mA), which would substantially increase system power consumption in battery-powered or low-power applications. Furthermore, its minimum operating voltage (10 V) is higher than the TLE2071's (4.5 V), making it incompatible with the original design's wide, low-voltage supply range. Additionally, it lacks the "Automotive" grade and AEC-Q100 qualification of the TLE2071, which is a critical disqualifier for automotive or high-reliability industrial applications. Although it offers superior performance in offset voltage, bias current, and bandwidth/slew rate, the aforementioned differences prevent it from being a reliable drop-in replacement.
2. LT1008S8TRPBF Substitution Conclusion Direct substitution is completely unsuitable due to a fundamental difference in core architecture. The TLE2071 is a J-FET input amplifier, whereas the LT1008 is a standard bipolar input amplifier. This results in a fundamental divergence in their input characteristics. The input bias current of the LT1008 (100 pA) is an order of magnitude higher than that of the J-FET-based TLE2071 (20 pA). In applications with high-impedance signal sources or precision integrators, this would introduce significantly larger input current errors, potentially altering the circuit's functionality entirely. Moreover, its slew rate (0.2 V/µs) is far lower than the TLE2071's (45 V/µs), rendering it incapable of handling signal processing stages requiring fast response. Despite its very low quiescent current and small offset voltage, the architectural mismatch means it is suited for entirely different application scenarios.
Analysis ID: 4E37-8F18000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com