Original Part
Alternative Part
1. BA3474F-E2 Substitution Conclusion
The BA3474F-E2 is a viable direct substitute in terms of basic parameters but presents one critical disadvantage. Its supply current is as high as 8 mA, significantly exceeding the total ~4 mA (4 channels x 1 mA) of the original AS324MTR-G1. Under identical operating voltages, the BA3474F-E2's power dissipation is approximately double that of the AS324MTR-G1, which may lead to increased overall system power consumption and higher die temperature.
It holds a significant advantage in dynamic performance, offering a slew rate of 10 V/µs and a gain-bandwidth product (GBWP) of 4 MHz. In contrast, these parameters are unspecified for the original part and are typically very low (the LM324 family typically offers ~0.5 V/µs and 1 MHz). The BA3474F-E2 can handle higher frequency and faster-changing signals, substantially improving AC performance.
The package is a 14-SOP, which is pin-compatible with SOIC but has a slightly larger body width, requiring verification of PCB layout space.
Conclusion: This part can be substituted if the application is not sensitive to power consumption and thermal dissipation but requires better AC performance. It is not recommended for battery-powered or low-power designs.
2. TL074QDREP Substitution Conclusion
The core technical differences of the TL074QDREP make it a substitution option for specific performance upgrades, but it comes with two key limitations.
First, its amplifier type features J-FET inputs. This results in an extremely low input bias current (65 pA vs. 20 nA for the AS324MTR-G1), providing a significant advantage in applications like high-impedance sensor interfaces or integrator circuits by greatly reducing errors induced by input current.
Second, its dynamic performance (13 V/µs slew rate, 5.25 MHz GBWP) is also far superior to the original part.
The two primary limitations are:
1) Its minimum operating voltage is 7V, whereas the AS324MTR-G1 can operate down to 3V. The TL074 cannot function in single-supply 5V or 3.3V low-voltage systems.
2) Its output drive capability is weaker (10 mA vs. 40 mA), making it unsuitable for directly driving heavy loads such as relays or LED arrays.
The package is a 14-SOIC, which is fully compatible with the original part.
Conclusion: In applications where the supply voltage is sufficient (≥7V) and high current output is not required, the TL074QDREP is an excellent performance upgrade substitute if very low input current and higher speed are needed. Otherwise, it is not a viable replacement.
Analysis ID: 7D39-D83A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com