Original Part
Alternative Part
Shunt Voltage Reference IC Adjustable 2.495V 36 VV ±0.5% 100 mA TO-92-3
1. LM431BCZXA Substitution Conclusion
This device can serve as a substitute, but a degradation in precision and temperature drift must be anticipated. The key differences compared to the original part are as follows: First, its nominal reference voltage is 2.495V, resulting in an inherent 0.005V offset from the AS431's 2.5V specification. Circuits requiring a precise 2.5V reference may need recalibration. Second, and most critically, its typical temperature coefficient is 50ppm/°C, which is significantly higher than the original part's 20ppm/°C. This leads to greater output voltage drift with ambient temperature variations, directly compromising the system's absolute accuracy and stability across the full operating temperature range. Consequently, this substitute is only suitable for general-purpose applications where temperature stability is not critical. Its use in applications with stringent precision and drift requirements warrants careful evaluation.
2. TL431BQLPME3 Substitution Conclusion
This component is a fully direct, drop-in replacement and offers superior performance in terms of accuracy and power consumption. The differences compared to the original part are: First, its initial accuracy (tolerance) is ±0.5%, which is better than the original's ±1%. This translates to better unit-to-unit consistency within a production lot and an output voltage closer to the nominal value. Second, its typical cathode operating current (Ika) is 700µA, lower than the original's 1mA. This indicates that the TL431BQLPME3 exhibits lower self-power consumption while performing the same function, contributing to improved system energy efficiency and reduced heat generation. All other critical parameters, including output voltage range, output current capability, and package form factor, remain identical. This part represents an equivalent or, in some specifications, superior alternative.
Analysis ID: 4D0C-5DFE000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com