Original Part
Alternative Part
1. LM2902PW Substitution Conclusion
From a key parameter perspective, the LM2902PW can serve as a replacement for the BA2902FV-E2, but two main differences must be noted: first, the maximum supply voltage is reduced from 32V to 26V, meaning direct substitution is not feasible if the original application operates above 26V; second, the quiescent current increases from 700µA (total) to approximately 1.4mA (per channel ×4), leading to higher overall system power consumption. However, this trade-off brings improved performance in gain bandwidth product (1.2 MHz vs. 500 kHz) and slew rate (0.5V/µs vs. 0.2V/µs), making it suitable for applications requiring higher bandwidth and faster response. The package remains the same—a 14-pin wide-body SSOP (pin-compatible)—allowing direct drop-in replacement, but power dissipation and voltage compatibility must be evaluated against design requirements.
2. LM2902PWRG4 Substitution Conclusion
The LM2902PWRG4 shares identical electrical parameters with the LM2902PW; the suffix "G4" only indicates TI's green (RoHS-compliant) and updated manufacturing process version. Therefore, the substitution conclusion remains the same as for the LM2902PW: it can directly replace the BA2902FV-E2 in systems operating below 26V, with the same trade-off of higher power consumption for improved bandwidth and slew rate. If the original design is power-sensitive or operates close to 32V, substitution may be limited. Otherwise, given pin compatibility and functional equivalence, it can be directly substituted and is better suited for higher-frequency signal processing demands.
Analysis ID: F921-EAA3000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com