Original Part
Alternative Part
1. LM358ADGKR Substitution Conclusion
Based on key technical parameters, the LM358ADGKR outperforms the original part BA2904FVM-TR (700 kHz bandwidth vs. 500 kHz, 0.3V/µs slew rate vs. 0.2V/µs, 15 nA input bias current vs. 20 nA, and 40 mA output current vs. 30 mA), making it a viable direct replacement in most cases. The most critical limitation is its maximum supply voltage of 30V, which is lower than the original part's 32V. If the circuit's operating voltage or potential surge voltage approaches or exceeds 30V, using the LM358ADGKR carries a risk of overvoltage damage. It is essential to verify the actual system voltage range before implementation. Provided the voltage requirement is met, the substitution will yield improved dynamic performance and drive capability.
2. LM358DGKR Substitution Conclusion
The LM358DGKR offers performance similar to the LM358ADGKR (800 kHz bandwidth, 0.3V/µs slew rate, 40 mA output current) and is likewise a strong candidate for direct replacement, subject to the same voltage constraint. The key differences are its slightly inferior input offset voltage (3 mV vs. the original part's 2 mV) and an input bias current equal to the original (20 nA). In applications demanding high DC precision, such as amplification of low-level sensor signals, the LM358DGKR may introduce marginally higher initial error. This necessitates calibration or an assessment of whether the error falls within the system's tolerance. If the system operates at or below 30V and is not sensitive to input offset voltage, this device serves as a suitable alternative.
Analysis ID: 5790-663D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com