Original Part
Alternative Part
1. RC4558DGKR Substitution Conclusion
The RC4558DGKR is compatible with the original part in core functionality and package, making it a viable substitute. However, key differences must be considered: its input bias current (150 nA) is significantly higher than that of the BA4558RFVM-TR (60 nA), which may introduce greater error in circuits with high-impedance signal sources or precision integrators. Additionally, its minimum operating voltage (10 V) is higher than the original's (8 V), potentially causing failure in low-voltage single-supply applications. It offers superior dynamic performance with a higher gain-bandwidth product (3 MHz) and slew rate (1.7 V/µs), though its slightly higher supply current (5 mA vs. 3 mA) requires evaluation of system power consumption. In summary, it is a suitable substitute in general audio or signal conditioning circuits with a supply voltage ≥10V where input bias current is not critical, but careful verification is advised for precision applications.
2. RC4558IDGKR Substitution Conclusion
The RC4558IDGKR has identical specifications to the RC4558DGKR; therefore, the substitution conclusion is the same. This part can directly replace the RC4558DGKR in terms of electrical performance. When compared to the original BA4558RFVM-TR, it shares the same limitations of higher input bias current (150 nA vs. 60 nA) and higher minimum operating voltage (10 V vs. 8 V), making it potentially unsuitable for low-voltage or high-precision applications. Its advantages in bandwidth and slew rate remain beneficial for circuits requiring high dynamic response. Overall, it is a viable alternative in non-precision, general-purpose amplification circuits with adequate supply voltage. However, substitution is not feasible if the original design relies on low input bias current or 8V low-voltage operation.
Analysis ID: 18CF-B5CA000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com