Original Part
Alternative Part
1. NCV2902DTBR2G Substitution Conclusion
The NCV2902DTBR2G is compatible with the original part in package and basic parameters, offering a wider operating voltage range (3–32 V) and higher output current (40 mA). However, its input bias current (90 nA) is notably higher than that of the original device (20 nA), which may degrade accuracy in high‑impedance signal applications. The gain‑bandwidth product (1 MHz) is slightly lower than the original (1.2 MHz), and no slew‑rate data is provided, requiring verification of dynamic response in the actual circuit. This device can serve as a direct replacement in applications insensitive to bias current or requiring higher voltage/current drive, but careful evaluation is advised for precision or high‑speed signal‑processing circuits.
2. LM2902T14‑13 Substitution Conclusion
The LM2902T14‑13 matches the original part in package and offers a wider operating voltage range (3–36 V), higher output current (40 mA), and lower quiescent current (1 mA per channel). However, its gain‑bandwidth product (700 kHz) and slew rate (0.3 V/µs) are both lower than the original (1.2 MHz, 0.5 V/µs), which may reduce high‑frequency response and transient performance. This substitute is suitable for applications where wide voltage range or low power consumption is prioritized over bandwidth and speed. If the original circuit relies on higher bandwidth or slew rate, performance requirements may not be met after substitution.
Analysis ID: F8A7-5127000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com