Original Part
Alternative Part
1. BA2904SFV-E2 Substitution Conclusion
The BA2904SFV-E2 shares key electrical parameters with the LM358APWR, such as supply voltage range (3–32V vs. 3–30V) and input offset voltage (both 2 mV), making it a potential substitute in low-frequency or DC applications. Notable differences include a lower slew rate (0.2V/µs vs. 0.3V/µs) and a lower gain-bandwidth product (500 kHz vs. 700 kHz). In high-frequency signal processing or fast transient response applications, the BA2904 may exhibit insufficient bandwidth and slower response. Additionally, its lower output current capability (30 mA vs. 40 mA) can limit load-driving performance, potentially affecting high-current output scenarios. Substitution can be considered in applications with relaxed dynamic requirements, provided the circuit’s speed and drive needs are verified.
2. BA4580RFVT-E2 Substitution Conclusion
The BA4580RFVT-E2 offers significantly better speed performance than the LM358APWR, with a higher slew rate (4V/µs vs. 0.3V/µs) and gain-bandwidth product (5 MHz vs. 700 kHz), making it suitable for high-speed amplification or signal processing. Its lower input offset voltage (500 µV vs. 2 mV) also improves DC accuracy. However, key differences include a substantially higher quiescent current (6 mA vs. 500 µA), leading to significantly increased power consumption, which may preclude its use in battery-powered or low-power designs. The higher minimum operating voltage (4V vs. 3V) may limit its use in 3V systems. Additionally, its higher input bias current (100 nA vs. 15 nA) could introduce greater error in high-impedance input circuits. Substitution can be considered in applications requiring high-speed performance where higher power consumption and voltage constraints are acceptable, provided power supply and accuracy compatibility are evaluated.
Analysis ID: E807-AB88000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com