Alternative Part
1. LM224KADR Substitution Conclusion
The LM224KADR can serve as a direct replacement for the original part, with core specifications being highly compatible. Minor deviations include a slightly higher quiescent current (1.4mA per channel, unspecified in the original), a lower output drive current (30mA vs. 40mA), and a slightly lower maximum supply voltage (30V vs. 32V). In most general-purpose amplification, filtering, or comparator circuits operating from 3–30V supplies, the LM224KADR can be substituted directly with comparable performance. In fact, it may offer slight advantages in precision and frequency response due to its higher gain-bandwidth product (1.2MHz vs. 1MHz) and lower input bias current (15nA vs. 90nA). However, it is not recommended in applications driving heavy loads (close to 40mA) or where supply voltages exceed 30V.
2. ADA4004-4ARZ-R7 Substitution Conclusion
The ADA4004-4ARZ-R7 is not a direct substitute for the original device due to significant differences in key parameters: a higher minimum supply voltage (10V vs. 3V), lower output drive capability (10mA vs. 40mA), and substantially higher cost. Although it offers far superior performance—including a 12MHz gain-bandwidth product, 2.7V/µs slew rate, and only 40µV input offset voltage—it is suitable only for applications where the supply voltage is ≥10V, loads are light, and high precision and speed are required, such as front-end signal conditioning in instrumentation. This part is not compatible with typical original designs that use single-supply low voltages (e.g., 3.3V/5V) or require driving moderate loads.
Analysis ID: B71B-F71D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com