Original Part
Alternative Part
1. TL431IZ Substitution Conclusion
The TL431IZ can functionally replace the TL431AILPG in basic applications; however, key performance degradations and potential package mismatches must be considered. Differences include: a tolerance of ±2.21% versus the original ±1%, leading to significantly reduced output voltage accuracy, which may increase system error in precision reference circuits; an unspecified temperature coefficient compared to the original’s typical 50 ppm/°C, implying unknown or poorer temperature stability and potential drift in wide‑temperature applications; and package designation as TO‑226‑2 / TO‑92‑2, which does not match the original TO‑226‑3 / TO‑92‑3 Long Body, indicating possible pin‑out or dimensional differences—physical verification of compatibility is advised. In summary, substitution is acceptable in general‑purpose circuits where precision and temperature performance are not critical, but it may lead to inadequate performance in precision reference or thermally variable applications.
2. LM431AIZ Substitution Conclusion
The LM431AIZ is a viable substitute for the TL431AILPG, particularly due to shared manufacturer (onsemi) and consistent quality, though minor parametric differences exist. These include: a tolerance of ±2% versus the original ±1%, resulting in somewhat lower output voltage accuracy and potentially greater error; a minimum output voltage of 2.5 V instead of 2.495 V—a slight 0.005 V (≈0.2%) deviation that is negligible in most applications but may require calibration in designs sensitive to absolute voltage; a temperature coefficient maintained at a typical 50 ppm/°C, matching the original and ensuring comparable temperature performance; and a package listed as TO‑226‑3 / TO‑92‑3 (TO‑226AA), which is pin‑compatible with the original TO‑92‑3 Long Body but may have slight mechanical dimensional variations—verify fit during installation. Overall, the LM431AIZ can safely replace the TL431AILPG in general‑power or reference circuits, but systems with strict voltage‑tolerance or exact‑value requirements should be tested after substitution.
Analysis ID: C979-8E6A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com