Original Part
Alternative Part
1. OP249GSZ-REEL7 Substitution Conclusion
The OP249GSZ-REEL7 can serve as a substitute for the LT1113CS8TRPBF, with the following key distinctions to consider: Its slew rate (22 V/µs) is significantly higher than that of the original part (3.9 V/µs), providing superior dynamic response and high‑speed signal handling capability. The input bias current (30 pA) is much lower than the original’s 300 pA, making it better suited for precision applications such as high‑impedance sensor interfaces. However, the gain‑bandwidth product (4.7 MHz) is slightly lower than the original’s 5.6 MHz, which may marginally affect small‑signal gain at higher frequencies. Additionally, the supply voltage range (9–36 V) is somewhat narrower compared to the original’s 9–40 V; system voltage must therefore be verified not to exceed 36 V. In summary, if the application does not demand the highest bandwidth and operates within the voltage limits, this substitution can offer improved speed and accuracy.
2. OP249GSZ Substitution Conclusion
The OP249GSZ is electrically identical to the OP249GSZ-REEL7; therefore, the substitution conclusion remains the same: it is a viable alternative to the LT1113CS8TRPBF. The primary advantages are the higher slew rate (22 V/µs) and lower input bias current (30 pA), which enhance transient response and DC precision, respectively. The trade‑off is the slightly reduced gain‑bandwidth product (4.7 MHz), which should be evaluated for high‑frequency applications, and the need to ensure the system supply voltage does not exceed the 36‑V upper limit. The only difference between the two parts is the packaging/reel format; their electrical characteristics are identical, so the analysis above applies directly.
Analysis ID: E207-8CCF000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com