Original Part
General Purpose Digital Isolator 2500Vrms 1 Channel 150Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
Alternative Part
General Purpose Digital Isolator 3750Vrms 1 Channel 15Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
General Purpose Digital Isolator 3750Vrms 1 Channel 15Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
1. SI8716BC-A-IS Substitution Conclusion
The SI8716BC-A-IS cannot directly replace the ISO721MD unless the application is very tolerant of signal rate and timing requirements. The key differences lie in data rate (15 Mbps vs. 150 Mbps) and timing performance (propagation delay 50 ns vs. 16 ns, pulse width distortion 25 ns vs. 1 ns). In designs originally relying on the high speed or precise timing of the ISO721MD—such as high-speed digital communication or precision control—the SI8716BC-A-IS would cause system failure due to severely insufficient bandwidth and excessive signal delay/distortion. Its advantages include higher isolation voltage (3750 Vrms vs. 2500 Vrms) and stronger common-mode transient immunity (35 kV/µs vs. 25 kV/µs), making it a candidate only in low-speed switching signal isolation scenarios where speed is not critical but enhanced insulation and noise immunity are required.
2. SI8717BC-A-IS Substitution Conclusion
The substitution conclusion for the SI8717BC-A-IS is identical to that of the SI8716BC-A-IS: it cannot directly replace the ISO721MD. Based on the provided parameters, the two devices show no difference in key specifications: data rate (15 Mbps) and timing performance (propagation delay 50 ns, pulse width distortion 25 ns) are both significantly inferior to the ISO721MD. Substituting in high-speed applications would inevitably create a performance bottleneck. Similarly, their higher isolation voltage and common-mode immunity are advantageous only in low-speed applications. It is important to note that while the SI8716 and SI8717 share identical listed parameters, the different part numbers and suffixes may indicate unlisted critical differences—such as default output state, certification standards, or other characteristics. Before considering any substitution, a thorough review of the complete datasheets for both devices is essential.
Analysis ID: 0A77-752D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com