Original Part
SDRAM - DDR Memory IC 128Mbit Parallel 167 MHz 700 ps 66-TSOP
Alternative Part
SDRAM - DDR Memory IC 128Mbit Parallel 200 MHz 700 ps 66-TSOP II
1. W9412G6KH-5 Substitution Conclusion
The W9412G6KH-5 presents a high-risk direct substitution due to critical differences in interface standards and access time. The original part uses a standard Parallel interface, whereas the W9412G6KH-5 is specified for an SSTL_2 interface. This difference implies potentially incompatible I/O voltage levels and signal termination requirements. If the host board was not designed for SSTL_2 (e.g., lacking the required Vref and termination resistors), direct replacement could lead to signal integrity issues and functional failure. Furthermore, its listed 50 ns access time is significantly slower than the original's 700 ps (0.7 ns). This discrepancy likely represents a different parameter classification (possibly command latency) rather than a performance downgrade. A rigorous comparison of full datasheet timing parameters (e.g., tRCD, tCL) is mandatory to avoid system timing mismatches. Although it offers a higher 200MHz clock frequency and a compatible package, the potential incompatibilities in both interface and core timing parameters preclude a simple "drop-in" replacement. Thorough circuit and timing validation is essential.
2. IS43R16800E-5TL Substitution Conclusion
The IS43R16800E-5TL is a highly viable and performance-enhanced direct substitute for the original component. All key characteristics are either identical or superior in the proposed replacement. Specifically: both devices utilize a Parallel interface, ensuring electrical compatibility and eliminating the need for circuit modifications; the access time is matched at 700 ps, guaranteeing consistency in core read/write timing; and the IS43R16800E-5TL operates at a 200 MHz clock frequency, outperforming the original's 167 MHz. This provides higher data transfer bandwidth while maintaining interface timing compatibility. Additionally, memory density, organization, voltage range, and package footprint are identical. This part is suitable for direct socket replacement and is expected to deliver equivalent or better performance, making it the preferred substitution choice. However, pre-production functional and stability testing on a prototype board is still recommended.
Analysis ID: 0FB5-F33B000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com