Alternative Part
1. TL431AILPRAG Substitution Conclusion
Based on package, basic operating principle, and key voltage/current parameters, the TL431AILPRAG can directly replace the KA431LZTA. The core difference lies in reference voltage accuracy: the original part is rated at ±0.5%, while the substitute is ±1%. After a direct replacement, the initial accuracy of the system's reference voltage will degrade, potentially doubling the output voltage deviation in the worst-case scenario. If the application circuit does not demand high absolute voltage accuracy—for instance, where only a stable reference point is needed, or where subsequent calibration/trimming is available—this substitution is entirely viable and a common industry practice. However, for high-precision measurement or set-point applications, the acceptability of this accuracy loss must be evaluated.
2. TL431ACLPRPG Substitution Conclusion
The feasibility conclusion for substituting the KA431LZTA with the TL431ACLPRPG is identical to that for the TL431AILPRAG. This part is functionally equivalent to the TL431AILPRAG in all provided parameters and is also a ±1% accuracy version, representing the primary distinction from the original ±0.5% accuracy part. The feasibility of the substitution, physical compatibility for direct replacement, and the impact of reduced accuracy align with the conclusion stated above. For practical selection, the TL431AILPRAG and TL431ACLPRPG can be considered equally viable alternatives, with their primary differences likely relating to production lot or manufacturer coding conventions.
Analysis ID: 7CE5-9282000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com