Original Part
Alternative Part
1. LT1492CN8PBF Substitution Conclusion
Direct substitution is not recommended. The key dynamic performance of the LT1492CN8PBF—a gain-bandwidth product of 5 MHz and a slew rate of 3 V/µs—is significantly inferior to that of the original AD828ANZ, which features a -3dB bandwidth of 130 MHz and a slew rate of 450 V/µs. The LT1492 is entirely incapable of handling the high-frequency or fast-changing signals (such as video signals) required by the original design, leading to severe bandwidth limitation and signal distortion. Although its exceptionally low quiescent current (500 µA per channel) and input offset voltage (120 µV) offer advantages in DC precision applications, the fundamental performance gap renders it unsuitable for substitution in the high-speed application scenarios for which the AD828ANZ was intended.
2. LT1211ACN8PBF Substitution Conclusion
This device is not suitable for substitution in high-speed applications and may only be considered with caution in extremely low-bandwidth scenarios. While the dynamic performance of the LT1211ACN8PBF—a gain-bandwidth product of 14 MHz and a slew rate of 7 V/µs—exceeds that of the LT1492, it still lags by an order of magnitude compared to the AD828ANZ (130 MHz, 450 V/µs). In any original design involving video or other high-frequency signal processing, the LT1211 would become a significant performance bottleneck, causing severe insufficient signal bandwidth and sluggish transient response. Its advantages, such as low quiescent current (1.8 mA per channel) and low input bias current (45 nA), cannot compensate for this fundamental performance deficiency when used as a substitute for a high-speed amplifier.
Analysis ID: 0089-5568000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com