Original Part
Alternative Part
1. LM258AST Substitution Conclusion
The LM258AST can serve as a limited substitute for the BA4560RFVM-TR, but with an accepted risk of performance degradation. The primary differences are as follows: Its Gain Bandwidth Product (GBW) (1.1 MHz vs. 4 MHz) and Slew Rate (0.6 V/µs vs. 4 V/µs) are significantly lower. This will degrade high-frequency signal processing capability and dynamic response speed, making it unsuitable for applications requiring fast signal transitions. Its higher Input Offset Voltage (1 mV vs. 500 µV) may introduce additional error in applications demanding high DC precision, such as sensor signal conditioning.
Its advantages include a lower Quiescent Current (700 µA vs. 3 mA), making it better suited for low-power designs. Furthermore, it supports a wider supply voltage range (down to 3V) and is AEC-Q100 qualified, enhancing its suitability for automotive or wide-supply-voltage environments. Substitution is viable if the original application has minimal requirements for bandwidth and slew rate, and prioritizes low power consumption or automotive-grade reliability.
2. LM2904ST Substitution Conclusion
The feasibility of substituting with the LM2904ST is low, primarily limited by critical performance parameter gaps. Its GBW (700 kHz) and Slew Rate (0.6 V/µs) are substantially lower than the original part's, further weakening signal processing bandwidth and transient response capability. This may render it inadequate for intermediate-frequency amplification or circuits requiring fast step response. Its Input Offset Voltage (2 mV) is four times that of the original, significantly impacting DC accuracy and likely necessitating additional calibration.
While its Quiescent Current (700 µA) and wide supply voltage range (3-30V) are similar to the LM258AST, its Output Current (30 mA) is marginally lower than the original's (25 mA), offering no advantage in drive capability. This device is only suitable for low-frequency or slowly varying signal applications with minimal precision and speed requirements (e.g., simple comparators, non-precision power control). It is not a suitable replacement if the original design relies on the dynamic performance of the BA4560.
Analysis ID: 5970-0105000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com