Original Part
Alternative Part
120 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0402 (1005 Metric) 600mA 170mOhm
120 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0402 (1005 Metric) 500mA 200mOhm
1. BLM15BX121SN1D Substitution Conclusion
The BLM15BX121SN1D is an excellent and directly interchangeable choice in terms of key electrical performance. Its core impedance (120Ω @ 100MHz) matches the original part exactly, ensuring identical filtering characteristics. The differences lie in its higher rated current (600mA vs. 500mA) and lower DC resistance (170mΩ vs. 200mΩ). This results in lower temperature rise and reduced power dissipation under the same load current, providing greater electrical margin. This constitutes a "derated" upgrade. A minor point to note is its slightly larger package width (0.55mm vs. 0.50mm). For PCB layouts with extremely tight spacing or when using high-density automated placement programs, it is necessary to verify that there will be no mechanical interference with adjacent components or solder pads.
2. GZ1005U121CTF Substitution Conclusion
The GZ1005U121CTF is a feasible substitute based on fundamental electrical parameters, but it features one critical mechanical dimension difference that requires careful evaluation. Its impedance, rated current, and DC resistance are identical to the original part, guaranteeing equivalent basic filtering performance and current-carrying capability. The key variance is its increased maximum height by 0.1mm (0.65mm vs. 0.55mm). In applications with height-constrained board layouts—such as ultra-thin devices or where traces/planes run beneath the component—this part may pose a risk of mechanical interference or assembly issues. This must be confirmed during layout design and assembly process planning. If sufficient vertical clearance exists, its electrical substitutability is sound.
Analysis ID: 5C44-5446000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com